Concrete Laboratory
The equipped concrete laboratory provides testing of the quality of materials used as components for concrete production (coarse and fine aggregates, water, cement), development of concrete mix designs for various concrete classes, quality control of fresh concrete, and testing of the mechanical properties of hardened concrete.

  1. Heading

    MKC EN 12350-1:2019
    |

    Testing of Fresh Concrete – Part 1: Sampling and Common Equipment

  2. Heading

    MKC EN 12350-2:2019
    |

    Testing of Fresh Concrete – Part 2: Slump Test

  3. Heading

    MKC EN 12350-5:2019
    |

    Testing of Fresh Concrete – Part 5: Flow Table Test

  4. Heading

    MKC EN 12350-6:2019
    |

    Testing of Fresh Concrete – Part 6: Density

  5. Heading

    MKC EN 12350-7:2019
    |

    Testing of Fresh Concrete – Part 7: Air Content – Pressure Methods

  6. Heading

    MKC EN 12390-1:2021
    |

    Testing of Hardened Concrete – Part 1: Shape, Dimensions and Other Requirements for Specimens and Moulds

  7. Heading

    MKC EN 12390-2:2019
    |

    Testing of Hardened Concrete – Part 2: Making and Curing Specimens for Strength Tests

  8. Heading

    MKC EN 12390-3:2019
    |

    Testing of Hardened Concrete – Part 3: Compressive Strength of Test Specimens

  9. Heading

    MKC EN 12390-7:2019
    |

    Testing of Hardened Concrete – Part 7: Density of Hardened Concrete

  10. Heading

    MKC EN 12504-1:2019
    |

    Testing Concrete in Structures – Part 1: Cores – Taking, Examining and Testing in Compression

  11. Heading

    MKC EN 12504-2:2021
    |

    Testing Concrete in Structures – Part 2: Non‑Destructive Testing – Determination of Rebound Number

  12. Heading

    MKC EN 196-1:2016
    |

    Methods of Testing Cement – Part 1: Determination of Strength

  13. Heading

    MKC EN 196-3:2017
    |

    Methods of Testing Cement – Part 3: Determination of Setting Time and Soundness

  14. Heading

    MKC EN 196-7:2012
    |

    Methods of Testing Cement – Part 7: Methods of Taking and Preparing Samples of Cement

  15. Heading

    MKC EN 1015-1:2009
    |

    Method of Test for Masonry Mortar – Part 1: Determination of Particle Size Distribution (Sieve Analysis)

  16. Heading

    MKC EN 1015-2:2009
    |

    Method of Test for Masonry Mortar – Part 2: Sampling of Mortars and Preparation of Test Mortars

  17. Heading

    MKC EN 1015-3:2009
    |

    Method of Test for Masonry Mortar – Part 3: Determination of Consistency of Fresh Mortar (By Flow Table Method)

  18. Heading

    MKC EN 1015-4:2009
    |

    Method of Test for Masonry Mortar – Part 4: Determination of Consistency of Fresh Mortar (By Plunger Penetration Method)

  19. Heading

    MKC EN 1015-6:2009
    |

    Method of Test for Masonry Mortar – Part 6: Determination of Bulk Density of Fresh Mortar

  20. Heading

    MKC EN 1015-7:2009
    |

    Method of Test for Masonry Mortar – Part 7: Determination of Air Content of Fresh Mortar

  21. Heading

    MKC EN 1015-11:2022
    |

    Method of Test for Masonry Mortar – Part 11: Determination of Flexural and Compressive Strength of Hardened Mortar

  22. Heading

    MKC EN 1015-12:2016
    |

    Method of Test for Masonry Mortar – Part 12: Determination of Adhesive Strength of Hardened Rendering and Plastering Mortars on Substrates

  23. Heading

    MKC EN 1015-18:2009
    |

    Method of Test for Masonry Mortar – Part 18: Determination of Water Absorption Coefficient Due to Capillary Action of Hardened Mortar

  24. Heading

    MKC EN 1338:2006 Concrete Paving Blocks – Requirements and Test Methods

    Annex C – Measurement of Dimensions
    Annex D – Determination of Freeze/Thaw Resistance
    Annex E – Determination of Water Absorption
    Annex F – Measurement of Strength
    Annex G – Measurement of Abrasion Resistance
    Annex J – Verification of Visual Appearance

  25. Heading

    MKC EN 1339:2006 Concrete Flags – Requirements and Test Methods

    Annex C – Measurement of Dimensions of Individual Flag
    Annex D – Determination of Freeze/Thaw Resistance
    Annex E – Determination of Water Absorption
    Annex F – Measurement of Flexural Strength and Determination of Breaking Load
    Annex G – Measurement of Abrasion Resistance
    Annex J – Verification of Visual Appearance

  26. Heading

    MKC EN 1340:2006 Concrete Kerbs – Requirements and Test Methods

    Annex C – Measurement of Dimensions
    Annex D – Determination of Freeze/Thaw Resistance
    Annex E – Determination of Water Absorption
    Annex G – Measurement of Abrasion Resistance
    Annex J – Verification of Visual Appearance